Midea CWRC800-A108 800GPD Smart Reverse Osmosis Filter with Wi-Fi and Electronic Tap

The Midea 800GPD reverse osmosis filter is a modern under-sink water filtration system that gives you a constant supply of clean, fresh drinking water. It works on the reverse osmosis principle and, with two 400GPD membranes, removes up to 99.9% of contaminants from water. High output, a compact tankless design and app control make it a convenient choice that suits modern kitchens.

Midea 800GPD reverse osmosis filter: modern filtration technology

The Midea CWRC800-A108 uses an advanced filtration system based on two 400GPD reverse osmosis membranes and a hybrid PCB cartridge. It thoroughly removes contaminants such as:

• heavy metals

• chlorine and its by-products

• pesticides

• bacteria and viruses

• sediment and microparticles

Filtration precision is 0.0001 μm, which removes even very fine contaminants. The system delivers up to 120 litres of water per hour, giving you a constant supply of fresh drinking water without storing it.

Tankless design: more space under the sink

The Midea filtration system uses tankless technology, meaning there is no storage tank. The unit filters water on demand, so you always get fresh water that has not been sitting in a tank.

The slim unit, measuring 45 × 10.5 × 41.5 cm, fits easily in most kitchen cabinets. The compact housing takes up little space, which is a real advantage in smaller kitchens.

Water saving and lower running costs

The system’s design significantly reduces the amount of water rejected during filtration. Under optimal conditions, the ratio of clean water to reject water is 2:1, meaning two litres of filtered water for every litre of reject water.

The built-in pump maintains the right pressure in the system, so filtration is efficient and stable even where mains water pressure is lower. The result is less water waste and more economical running.

App control and smart tap

The system has a Wi-Fi module that connects the unit to the manufacturer’s mobile app. You can conveniently monitor the key operating parameters of the filter, such as:

• water quality

• TDS level

• filter cartridge wear

• when service is due

An electronic tap is also included, displaying the current water quality and the state of the filter cartridges.

Simple installation and easy operation

The Midea filtration system is designed for easy installation and convenient use. The kit includes all fitting parts and clear installation instructions.

Thanks to the modular design, the filter cartridges can be replaced quickly and without tools, which makes regular maintenance much easier.

Key features of the Midea 800GPD system

• tankless design that delivers freshly filtered water on demand

• high output: up to 120 litres of drinking water per hour

• very fine filtration to 0.0001 μm

• removes up to 99.9% of contaminants

• smart control with a Wi-Fi module and mobile app

• electronic tap with TDS display

• low reject water ratio (about 2:1)

• built-in pump for stable pressure

• compact design, ideal for under-sink installation

• modern, minimalist design

---

Specifications: Midea 800GPD Smart

General

Brand: Midea
Model: 800GPD Smart (CWRC800-A108)
Filtration stages: 2 (equivalent to an RO5 system)
Cartridges:

• 2 × 400GPD membrane

• 1 × PCB filter

Cartridge life:

• membrane: 12-24 months (up to 7,200 litres)

• PCB filter: 6-12 months (up to 3,600 litres)

Power supply: yes (power adapter included)
Wi-Fi: yes
Filter replacement indicator: yes, on the tap display, in the app and on the front panel of the unit
Water tank: none (tankless system)

Technical data

Width: 10.5 cm
Depth: 44.4 cm
Height: 41.4 cm

Inlet water temperature: 4-38°C
Inlet water pressure: 0.1-0.4 MPa (1-4 bar)

Power consumption: 80 W
Rated voltage: 100-240 V

Membrane output: 2 × 400 GPD
System output: up to 120 l/h

Tap type: single, electronic

Net weight: 12.1 kg
Gross weight: 14.4 kg

Installation service: not included

Safety

Certification: CE